September 6, 2018

Historical Projects

BHP COOLING TOWER FILTRATION PLANT DESIGN FLOW: 750M3/HR

This project called for a filtration system that could remove fine sediment from the cooling tower water.Our solution was to offer Culligan swimming pool filters for the duty. These are multi-media filters that filter down to 10-microns, nominal.

BONALBO WATER TREATMENT PLANT DESIGN FLOW:15M3/HR

The Bonalbo Water Treatment Plant was built for Kyogle Council, NSW, Australia.The plant is a DAFF plant; Dissolved Air Flotation, followed by rapid sand filtration.

FONTERRA CLANDEBOYE WATER TREATMENT PLANT DESIGN FLOW: POTABLE WATER: 90M3/HR

For this project we used Culligan technology, comprising depth filtration followed by demineralization.

FONTERRA TERAPA WATER TREATMENT PLANT DESIGN FLOW: 8,500M3/DAY

The TeRapa water treatment plant is of our own design. The technology used is contact flocculation.The plant comprises two treatment trains, operating in parallel. Each train comprises two filter cells, operating in series, both located in a horizontal filter vessel.

FONTERRA WAITOA WATER TREATMENT PLANT DESIGN FLOW: 150M3/HR

The Waitoa water treatment plant is a Culligan “OFSY” plant.

FRUCOR EFFLUENT WATER TREATMENT PLANT DESIGN FLOW: 10M3/HR

The Frucor effluent treatment plant is a pH adjustment plant, adjusting the pH of the effluent stream produced from Frucor’s juice manufacturing processes, so that the effluent is within the pH range allowed by the local authority receiving sewer.